We would like to introduce our latest feature – Can Smart adblue emulators with self-diagnosis function enabled. This will make adblue emulator installations much easier as installer will be able to quickly pin point the problem using self-diagnosis led light system on the emulator. The way it works is once you have connected adblue emulator and switched ignition on, you will see a number of led lights on the emulator light up. Each of these lights will indicate correct (or incorrect) SCR, NOX, CAN LINE.. connections.
Although most of our trade customers are very knowledgeable about adblue emulator installation, and normally do not require any assistance, some novice installers may not get it right the first time, especially on more complicated EURO 6 trucks. That is where self-diagnosis function comes in really handy.
Let’s discuss some main adblue emulator installation points, and how self-diagnosis led system can help.
CAN LINE Connection:
Adblue emulator will communicate with vehicle’s ECU via Can lines (canbus) Emulator needs to receive and send constant signals indicating/emulating SCR/NOX system performance as if it was working as it should even though these systems will be disconnected after adblue emulator is installed. Therefor it is very important to connect can lines correctly. You will have two led lights on the emulator next for can line connection diagnosis. Should connection be correct, you’ll see a light next to ‘’[OK] Can line’’ light up. Should connection be not correct, you will see ‘’[PROBLEM] Can line’’ Knowing that there is a problem with can line connection, you should first try swapping can lines over (can-hi with can-low) in most cases this will be the answer to the problem. If this did not help and you still have a PROBLEM light on, you should inspect your can lines making sure they are ‘live’ and not broken.
SCR Disconnection:
In order for adblue emulator to perform properly, after installation you will need to disconnect SCR system or at least some of its components, depending on truck make and model. Emulator will be sending signals to the vehicle ECU, which would normally be sent by SCR system, so it is important SCR system is disconnected. If it is not, ECU will receive double signals which will cause errors codes. Should SCR disconnection be done correctly, you will see [OK] SCR disconnected. IF SCR is not disconnected, or disconnected incorrectly, you will see [PROBLEM] Disconnect SCR.
These are only some of the benefits self-diagnosis adblue emulator system can offer. It gives the installer instant connection diagnosis and makes it clear what needs to be corrected in case of incorrect connection.